Top Job Logo

batteries Safety tests

Low Voltage <mark class='ep-highlight'>Testing</mark> Services
Testing Labs
Low Voltage Testing Services
Our independent physical verification of LV panels is 100% based on testing , covering mechanical, dielectric, short circuit and temperature rise effects. It verifies all the normal and fault conditions your panel will experience in real-world operation. We carry out low voltage tests on panels in our own labs against the IEC 61439-1 international standard […]
Go to
Testing Labs
Low Voltage Type Testing
KEMA LABS provide independent hands-on verification of LV panels based entirely on rigorous testing . We test for mechanical, dielectric, short circuit and temperature rise effects covering all the potential conditions your panels will go through in day-to-day operation. Our labs test panels against the IEC 61439-1 international standard at both 50 Hz and 60 […]
Go to
Low Voltage Switchgear Assemblies and Switching Devices
Products Expertise
Low Voltage Switchgear Assemblies and Switching Devices
For low voltage switchgear and controlgear assemblies (lv panels), quality means safety . Poor quality can lead to power outages, fires or injury, so contractors need to have complete trust in the components they buy. Our testing approach and type test certificates provide the trusted evidence you need to convince your customers of the quality […]
Go to
E-mobility
Products Expertise
E-mobility
Transportation will be the next sector to decarbonise, after electricity. The rise of electric vehicles will bring huge changes to the electricity sector as well as the automotive industry. Kema Labs can help you navigate this new and uncertain landscape. We have the expertise, competence and cutting-edge test facilities to help you take the last […]
Go to
Low Voltage Laboratories
Testing Labs
Low Voltage Laboratories
Kema Labs LV test laboratories have been in operation for more than six decades. We have more than 15 test bays that can test that products meet international product design requirements and comply with international standards. Panels are tested in our own labs against the IEC 61439-1 standard, and can be carried out at both […]
Go to
<mark class='ep-highlight'>Battery</mark> Storage systems
Products Expertise
Battery Storage systems
As sustainable energy becomes more widespread, energy storage solutions are becoming essential to balance electricity supply and demand. Whether you are seeking to bring new products to market or consolidating a developed technology, the right partner is crucial . Our energy storage experts offer non-destructive (pre-) testing of batteries in dedicated facilities, as well as:
Go to
About Us
Environment, Safety and Quality
Environment For CESI, preventing pollution, minimizing the environmental impacts of its activities and compliance with applicable legal requirements are fundamental requirements. Our Environmental Management System is the framework for ensuring we minimize our impact upon the environment. It sets out the resources and training that are needed, and the controls that must be in place […]
Go to
Dam <mark class='ep-highlight'>Safety</mark> for Hydropower Development
Views
Dam Safety for Hydropower Development
Hydropower projects can actively contribute to poverty reduction and life quality enhancement in local communities Hydropower is renewable because it draws its essential energy from the sun which drives the hydrologic cycle that, in turn, provides a continuous renewable supply of water. Hydropower accounts for more than 92 percent of all renewable energy generated and […]
Go to
Technical papers
Safety aspects of MV and HV underground cables and accessories in urban areas
The booming of renewable power stations (solar and wind mill mainly), the increase use of Interconnectors and submarine cables, the construction of urban substations in big cities with intense population and the need to avoid the use the overhead lines (right of way and so on), are the main factors leading to the increasing amount […]
Go to
Technical papers
Safety issues in case of internal arc on HV cable terminations, bushings
Worldwide demand for new T&D networks will increase in the near future pushing the utilities to install a larger number of high voltage equipment like cable terminations, bushings and surge arresters. Meanwhile the attention to environmental and safety issues is generally increasing . The aim of this paper is to analyze the potential risks associated […]
Go to
On Site <mark class='ep-highlight'>Testing</mark>
Testing Inspection and Certification
On Site Testing
Whenever you install a new or refurbished component, it is essential to verify that it works properly before you put the component or substation into service. Even the smallest failure could cause a full-scale short circuit – with potentially disastrous consequences. Kema Labs offers onsite commissioning testing of components such as transformers, generators and high-voltage […]
Go to
Low Voltage Laboratories
IEC 61850
IEC 61850 is an international standard that defines communication protocols for intelligent electronic devices (IEDs) in substations and electrical automation systems. It enables seamless data exchange between different devices, improving the interoperability and reliability of substation automation systems. The standard covers various communication requirements, ensuring that systems are resilient and can handle critical operations in […]
Go to
Testingly
Go to
Testing Certification Inspection
Testing labs
Go to
<mark class='ep-highlight'>Testing</mark>, Inspection and Certification Services
Testing, Inspection and Certification Services
Why choose KEMA Labs? How to submit your request? Submit your request now Don’t miss this opportunity to get the best testing , inspection and certification services for your energy products and systems. Fill out the form below and get a quote from KEMA Labs today.
Go to
<mark class='ep-highlight'>Tests</mark> on construction materials
Testing & Inspections
Tests on construction materials
ISTEDIL, the ISMES’ specialized laboratory for construction materials, provide technical assistance and quality control for: Analysis of:
Go to
TYPE <mark class='ep-highlight'>TEST</mark> OF ENERGY METER
Type Test of Energy Meter
TYPE TEST OF ENERGY METER
In June 2020, new versions of the EN-IEC product standards for electricity meters, the EN-IEC 62052-11, EN-IEC 62053-21, -22, -23, and -24, were published. These second editions cancel and replace the first editions published in 2003, including their 2016 amendments. This edition constitutes a technical revision. In the 2020 versions, it is mentioned that the […]
Go to
Explosion Proof <mark class='ep-highlight'>Test</mark> Laboratories
Testing Labs
Explosion Proof Test Laboratories
International standards require electrical and non-electrical equipment installed in hazardous areas to prove it can withstand particular external events such as explosions, spark ignition, extreme heat and high impacts. To test these capabilities, you need special laboratories that can simulate such extreme conditions. KEMA Labs offers a wide range of testing services for electrical and […]
Go to
<mark class='ep-highlight'>Tests</mark> on soils and rocks
Testing & Inspections
Tests on soils and rocks
ISTEDIL, the ISMES’ specialized laboratory for construction materials, performs tests on soil such as: We also carry out tests on rocks:
Go to
<mark class='ep-highlight'>Testing</mark>, Inspection and Certification Services
Testing, Inspection and Certification Services
Why choose KEMA Labs? How to submit your request? Submit your request now Don’t miss this opportunity to get the best testing , inspection and certification services for your energy products and systems. Fill out the form below and get a quote from KEMA Labs today.
Go to